FEATURES:

* High speed through the sprocket operation at 2X and 4X sync speed
   or 3X and 6X speed

* Solid State logic electronics for Intermittent

* Complete IC logic and control with electronic drive

* Picture in reverse at sync speed selectable at projector or remotely

* Film take-up servo controlled

* Simple push-button control of all projector functions from local
   pedestal or at a two remote positions

* 3000 feet (1000 meter) reel capacity

* Can be the Master or Slave in high speed operation

* Can be interfaced with existing distributor System for sync speed
   operation by optical decoder

* Supplied with lamp house table for 1000, 1600 & 2000 Watt Xenon Lamphouses and Power Supply

* Takes standard 35mm ( 70.6mm or 62.5mm Diameter and 16mm projection (42.5mm) lenses

* PR-636B offers changeable 16/35mm format

* Optional Digital LED Stereo Analog Reader or Standard Monaural Optical Analog Readers

* Only 6 parts to change from 35mm to 16mm. Sprockets are combination 16 & 35mm as required

* 16mm optical sound head removable for 35mm operation

* Optical Pre-Amplifier and D.C. Regulated Exciter lamp switches from 35 to 16mm

* Gate release in Reverse and High Speed

* Electro Magnetic Dowser . changeovers optional for dual projector operations

PR-635-B (35m) , PR-616-B (16mm) , PR-636-B (16 & 35mm) 

SPECIFICATIONS AND OPTIONS

FILM DRIVE SYSTEM
Stepping Motor Sprocket Drive, Sprocket de-clutch for start mark alignment, IC Logic and controls, Separate drive motor for shutter synchronized to film pull-down, Sprocket de-clutch for start mark alignment

REEL SPINDLE DRIVE
200 Oz. Inch single phase torque motors. Torque Servo control arms. Selector for CW/CCW rotation of feeding spindles. Automatic film cutoff switch.

INTERMITTENT DRIVE SYSTEMS
Low Inertia D.C. Drive motor with encoder discs as an integral part of the servo motor assembly. I-C Logic's and controls with external front panel drive and indexing controls

STANDARD OPTICAL OUTPUT
SVA Stereo Solar Cell or LED Reader OPTIONAL 4 TRACK MAG, DOLBY, DTS or SONY DIGITAL READERS 600 ohms ungrounded

LENS CARRIER
48" from Base

DIMENSIONS 
73" H x 17" W x 40" D

WEIGHT
500 Lbs.

POWER
8 amps 120 volts 60 Hz, 5 amps 220 volts 50 Hz

Lamphouses & Rectifiers
Optional 1000, 1600, 2000, or 2500 Watt Xenon with Cold Dichroic Reflector all equipped with Amp Meter Hour Meter, and Blower Rectifiers-Switching or Brute Force, single or three phase, 110/220/380/415 or 440V 3 phase 50 or 60 cycles Lenses-Optional 16 or 35mm format Multi-Coated Air Spaced for 16, 35, 70mm & Special Venue.